| |
| |
Model
No. F6050 Assembly Instructions
|
| |
|
Step
1 Preperation |
- Spread your tent on level ground and pull out the four corners.
- Open the window flaps. This will allow air into the tent during
assembly.
|
| |
 |
Step
2 Pole Assembly |
- Assemble all the shock-corded poles. You will have 2 sets
of long poles and 1 set of short poles.
- Slide the two long poles through the center sleeves diagonally
so that the frames form an "X"
|
| |
|
Step
3 Tent Erection |
- Secure each end of a pole into a pin located on each corner
of the tent floor. The poles will form arches.
- Starting from ground level, attach the tent clips to the poles
along the tent pole lines.
|
| |
|
Step
4 Rain. Fly |
- Insert the ends of the short pole into the pole pockets of
your rain fly.
- Tie the center of the pole with the center tie.
- Place the rain fly over the tent and attach the hooks to the
rings located on the tent corners.
- Tape the Velcro around the poles.
|
| |
|
Step
5 Stake |
- Stake down the 4 corners first. And stake the other loops
on the floor
- Take free end of a guy rope and tie it to a webbing
loop on one side of the rain fly.
- Guy out the rope straight at a 45-degree angle. Stake it out
and adjust the rope with a stopper.
- Repeat this procedure for the other side of the rain fly.
|
