Spread your tent on level ground and pull out the four corners.
Open the window flaps. This will allow air into the tent during
assembly.
Step
2 Pole Assembly
Assemble all the shock-corded poles. You will have 2 sets
of tent poles.
Slide the two tent poles through the pole sleeves.
Step
3 Tent Erection
Place one end of the pole into a pin located on one side of
the tent floor.
Flex the fiberglass pole by pushing the other end upward to
make an arch.
Secure it by placing the end into a pin on the other side
of the tent floor.
Repeat this procedure for the other pole.
Step
4 Stake
Stake down the 4 corners.
CAUTION: This tent has no rain fly, rain
may leak through the roof seam lines easier than a tent with
a rain fly, and is not recommended for camping under heavy rain.
Copyright(c)1999-2000
TentsOnSale.com All rights reserved.
