| |
| |
Model
No. S3050 Assembly Instruction
|
| |
 |
Step
1 Preperation |
- Spread your tent on level ground and pull out the four corners.
- Open the window flaps. This will allow air into the tent during
assembly.
|
| |
|
Step
2 Pole Assembly |
- Assemble all the shock-corded poles. You will have 2 sets
of long poles and 1 set of short poles.
- Slide the two long poles through the center sleeves diagonally
so that the frames form an "X"
|
| |
|
Step
3 Tent Erection |
- Place one end of the pole into a pin located on a corner of
the tent floor.
- Flex the fiberglass pole by pushing the other end upward to
make an arch.
- Secure it by placing the end into a pin on the other corner
of the tent floor
- Repeat this procedure for the other pole.
- Attach the tent clips to the poles along the tent pole lines.
|
| |
|
Step
4 Rain Fly |
- Insert the ends of the short pole into the pole pockets of
your rain fly.
- Tie the center of the pole with the center tie.
- Place the rain fly over the tent and attach the hooks to the
rings located on the corners.
- Tape the Velcro around the poles.
|
| |
 |
Step
5 Stake |
- Stake down the 4 corners first.
- Take a free end of the guy rope and tie the rope to the webbing
loop on one side of the rain fly.
- Guy out the rope straight at a 45-degree angle. Stake it out
and adjust the rope with a stopper. Repeat this procedure for
the other side of the rain fly.
|
| |
 |
|
|
|
| |
 |
|
| |
