| |
| |
Model
No. S3081 Assembly Instructions
|
| |
 |
Step
1 Preperation |
- Spread your tent on level ground and pull out the four corners.
- Open the window flaps. This will allow air into the tent during
assembly.
|
| |
|
Step
2 Pole Assembly |
- Assemble all the shock-corded poles. You will have 2 sets
of long poles and 1 set of short poles.
- Place the 2 long poles over the tent from corner to corner diagonally so that the frames form an "X"
|
| |
|
Step
3 Tent Erection |
- Secure each end of a pole into a pin located on each corner of the tent floor.The poles will form arches.
- Starting from ground level, attach the tent clips to the poles along the tent pole lines.
- Repeat this procedure for the other pole.
|
| |
|
Step
4 Rain Fly |
- Insert the ends of the short pole into the pole pockets of
your rain fly.
- Tie the center of the pole with the center tie.
- Place the rain fly over the tent and tape the Velcro around
the tent poles. Velcros are located inside the tent fly along
the tent pole lines.
- Attach the S-hooks fro the rain fly to the rings on the tent
corner.
|
| |
|
Step
5 Stake |
- Stake down the 4 corners of the tent first. And stake the
other loop on the floor.
- Stake down the intermediate loops on the fly.
- Stake down the front end of the fly to form a gear room.
- Take a free end of the guy rope and tie the rope to the webbing
loop on one side of the rain fly.
- Guy out the rope straight at a 45-degree angle. Stake it out
and adjust the rope with a stopper.
- Repeat this procedure for the other side of the rain fly.
|
